Click to collapse In order to remove the device from the ceiling, push it into the direction of the power supply at one side of the device until you can hear a "click". Click to collapse Insert a readable and unlocked micro SD-card and format it. Click to collapse There's an overexposure due to a strong light source.
Click to collapse There ist a strong lightsource shining into the camera lens.
Click to collapse The micro SD-card is locked. Unlock the micro SD-card. The micro SD-card is full. Format the micro SD-card see manual chapter [59] or activate the overwrite function. Click to collapse This can be due to motion from trees or plants, light or shadow, snow or rain etc. Reduce the sensitivity of the motion detection or change the position of the camera. Click to collapse The settings are probably incorrect. Check the following points:. Click to collapse The software hangs.
Click to collapse The line is caused by the mechanical filter sticking. This can result from the incorrect orientation or by movement of the camera.
3S-Smart Software Solutions GmbH
Please try the following:. Click to collapse This is caused by the mechanical filter sticking. Before activating the function, the following data needs to be entered: Example for Google-Mail:. Click to collapse As sending mails with DF works best in combination with Gmail accounts, we suggest to create a Gmail account and to use the following settings for your Gmail account. Click to collapse Probably the touch screen auto-lock is enabled. Click to collapse The reason could be motion from trees or plants, light or shadow, snow or rain etc.
Click to collapse Activate the push notification see manual chapter Click to collapse The power safe mode is selected. Click the mouse once or switch the energy saving mode see manual chapter Click to collapse Cameras are not activated or have no connection. See faults "The camera image does not appear on the screen", " The wireless reception is unstable", "The monitor picture switches of automatically" above. Click to collapse With an iphone, the app can only be displayed in the landscape format.
You can turn to a portrait format with ipad or Android devices only. Click to collapse The reason can be motion from trees or plants, light or shadow, snow or rain etc. Deselect or reduce the sensitivity of the motion detection through pixel change, or reposition the camera see manual chapter Click to collapse For a proper functioning, USB sticks should not be used with the recorder.
Instead, you can use a micro SD card or an external hard disk with separate power supply. Click to collapse Please check the following points:. It is however, not recommended for the main entrance door of a house or flat when you are absent, as you yourself will cause an alarm on leaving and entering the property. However if you position the mini alarm on the inside, you yourself will cause an alarm when you open the door or drawer. Click to collapse Metallic surfaces can reduce the strength of the magnetic field.
Test the function of the unit by holding the components on the window and window frame, before final fixing. If no alarm sounds when the magnet is removed window opened then try the following:. Click to collapse Hold the Alarm unit and the magnet in the proposed position and by opening the window test the function. If the initial distance is too great the alarm will not stop when the window is closed. The following should help:. Insert new batteries. Observe polarity when inserting.
Indexa AC50 | 1stclass-ltd.com
Click to collapse No. You can mount the unit on the opening sides of the window see fig. On the hinged side of the window the alarm will not operate see fig.
Observe the following points when mounting:. The unit will operate in all orientations. You can mount the unit upside down see fig. A , lying to the left see fig.
indexa df 300 Beste Verkäufe
B or lying to the right see fig. The same points apply:. Click to collapse Yes, to a limited extend depending on the size and design. Mount the unit on the bottom of the window frame European style windows. Make sure that in the tilted position an alarm is not already caused. Click to collapse The alarm will continue until the window is closed, until the unit is turned off or until the battery becomes exhausted.
Click to collapse It depends on how often an alarm is sounded. On average the batteries will last about a year. Click to collapse Cut carefully through the adhesive pads with a knife. Then remove the remainder of the pads. Click to collapse You have 12 seconds to open the door. The alarm is activated only when the door is closed again. Click to collapse The door alarm is controlled by a microprocessor. The times are fixed and cannot be changed.
Click to collapse The selected mode is only active when the unit is switched on again.
What does that mean? Click to collapse The batteries are run down. Insert new batteries and check their polarity. Click to collapse What does that mean? The flashing green light means that an alarm was triggered and not switched off with the key. The flashing red LED means that the batteries are run down. Click to collapse Metal surfaces may reduce the strength of the magnetic field.
We recommend that you test the function provisionally before installing the door alarm. If removing the magnet does not trigger an alarm, you should try the following:. Click to collapse Hold the door alarm and the magnet to the door frame and the door and test the function provisionally. If the distance is too large, you can try the following:. Click to collapse The connection of the two-core connecting wire is incorrect. Swap the position of the wires at the terminals of the indoor station. Click to collapse Yes, you can use an existing doorbell cable. You must however observe the cable cross section and maximum length.
You can find these in the instruction manual. Connect the cable and test the door intercom before you install the units. Click to collapse Yes, if you use the correct cable and make sure the connections are well made. Click to collapse In addition to the two-core cable for the audio connection, another two cores are required if you wish to control an electric door release. You must observe the cable cross section and the maximum length. These are stated in the instruction manual. Test the functioning of the door release from the indoor station before final installation.
- indexa df 300 Die Bestseller;
- whatsapp von freundin mitlesen;
- App-Überwachungskamera, AC50;
- iphone hotspot überwachen.
Use an electric door release which is suitable for your door. Observe that the door release must operate with 12 V DC maximum 1A current drain. The power supply for the door release is provided from the indoor station, you do not require any additional transformer. The connection of the door release is not polarity dependent. Click to collapse No, it is not compatible with any other systems.
Angebote zu ähnlichen Produkten
Click to collapse No, this is not possible any more. Click to collapse Yes, you should buy a second complete system and just use the outside unit. Connect the two units in parallel to the inside unit.